Applications

Automated truck fill stations

An automated truck fill station lets water carts and tankers fill up without an operator on site. A Neo controller handles the dispensing: it switches the pump, and the generator where the site has one, measures each fill from the flow meter, and stops when the fill is complete or an interlock trips. ESE Core records every fill and alerts your team to low tank levels and faults.

How it works

  1. 1The driver starts a fill at the station.
  2. 2Neo starts the generator where the site needs one, then the pump.
  3. 3Hardware pulse counters read the flow meter, so the delivered volume is measured, not estimated.
  4. 4Dispensing stops when the set volume is delivered or an interlock trips.
  5. 5Each fill is logged in ESE Core with its time and volume.

What you get

Flow metering per fill

Hardware pulse counters read standard flow meters, so every fill is measured and recorded.

Pump and generator control

Digital outputs start and stop the pump and generator, and interlock logic stops dispensing on a fault.

Supply tank level

A 4-20mA level sensor on the supply tank shows how much water is left and raises an alert before it runs low.

Cloud log and alerts

Every fill, fault and tank level is visible on the ESE Core dashboard and mobile app, with alerts for low levels and faults.

Built for remote sites

Low power use with battery monitoring and deep sleep modes, and a solar charging input on Neo Trinity.

Frequently asked questions

Can a truck fill station run without mains power?

Yes. Neo controllers are designed for low power use with battery monitoring, Neo Trinity has a solar charging input, and genset control lets the controller start a generator for the pump.

How is the water used at each fill recorded?

A flow meter on the fill line is read by the controller’s hardware pulse counter. Each fill’s time and volume is sent to ESE Core, where it can be reviewed on the dashboard.

What stops the pump if something goes wrong?

Interlock logic in the controller stops dispensing on a fault or a low supply tank, and ESE Core alerts the people responsible. Electrical protection stays in the pump’s switchboard.

Products used

Need the switchboards, pump station control or PLC and SCADA work as well? ESE Core is built by Electrical Systems Engineering, who design and build them in Perth.