Tank levels and flow
4-20mA and 0-10V inputs for level sensors, and hardware pulse counters for flow meters.
Applications
Dust suppression draws water from tanks, standpipes and water carts spread across a mine site, usually with no live view of how much is used where. Neo Field controllers measure tank levels and flow at each point and switch pumps on a schedule or a rule, and ESE Core shows site-wide water use, alerts on low tanks, unexpected flow and faults, and lets operators act remotely.
4-20mA and 0-10V inputs for level sensors, and hardware pulse counters for flow meters.
Start and stop pumps remotely, on a schedule or from a rule, with interlock logic in the controller.
Neo Field is designed for mining process monitoring and low power use at remote or off-grid sites.
Modbus RTU over RS485 and Sparkplug support connect to existing instruments and industrial systems.
Tank and dam levels, flow at standpipes and fill points, pump run status and run time, and any instrument that outputs 4-20mA, 0-10V, pulses or Modbus RTU.
Yes. Neo controllers switch pumps from their outputs, either from an operator in ESE Core or automatically from schedules and level or flow rules.
Neo reads Modbus RTU devices over RS485 and supports Sparkplug, so it can add remote visibility to points that are not on the site SCADA without replacing it.
Need the switchboards, pump station control or PLC and SCADA work as well? ESE Core is built by Electrical Systems Engineering, who design and build them in Perth, including bore field and pump control cabinets.